Details

---

MINI-FSV

PRODUCT FEATURES:

High external static pressure 35Pa
When unit is installed on a narrow balcony and exposed to the sun, the fence at the front side would restrict hot air from being discharged. Heat accumulated in an enclosure can cause over-heating. This could potentially result in damage or shorten the product’s life span. A high external static pressure sends the air further away from the outdoor unit and through the fence. This provides better air circulation and distribution.



Long piping design length for greater design flexibility
Adaptable to various building types and sizes







Refrigerant chargeless up to 50m
Up to 50m of piping without additional gas charging makes installation flexible, easy and hassle-free.

A 50m pipe length is sufficient for most residential and small business buildings. When total piping length exceeds 50m, additional refrigerant charge is required.



Compact design
Also, since Mini VRF LE Series is a single unit, it is possible to install the unit in more various places compared to the Single Split system.

In addition to raising efficiency, we have made the outdoor unit more compact. It can now be installed in places that were previously too small.



Up to 13 indoor units connectable
An expansion from Panasonic VRF line up, the Mini FSV is compatible with the same indoor units and controls as the rest of the FSV range.

* Use any of the 22 type indoor models. Depending on the size or type of indoor unit, tubing size shall be changed. Please refer manuals for details.
* Diversity ratio 50-130%
* 6 HP only; 4 HP for 7 units, 5 HP for 8 units.


High efficiency
The operation efficiency has been improved using highly efficient R410A refrigerant, a DC Inverter compressor, DC motor and a heat exchanger design.



Energy savings design



Flexible demand response with the optional terminal block

• Demand Response

Featuring inverter control technology, all Panasonic Mini FSV systems are Demand Response Management (DRM) ready. With this control, power consumption at times of peak load
can be set in three steps to deliver optimum performance. This helps to reduce annual power consumption with minimal loss in comfort.

*Terminal block supplied as optional kit. (CZ-CAPDC3) Please ask you dealer.

• Flexible Demand Response with the CZ-CAPDC2*1

Setting is possible as 0% or in the range from 40 to 100% (in steps of 5%). At the time of shipping, setting has been done to the three steps of 0%, 70% and 100%.

*1 An outdoor Seri-Para l/O unit (CZ-CAPDC2) is required for demand input signal.
* Demand timer setting for high spec remote controller is available.



Wide operating range
• Cooling operation is possible even when outdoor temperature is as low as -10°C DB.
• Cooling operation is possible even when outdoor temperature is as high as 46°C DB.
• Heating operation is possible even when outdoor temperature is as low as -20°C WB.

The remote controller temperature can be set from 18°C up to 30°C (Cooling), 16°C up to 30°C (Heating)*1.

*1 Depending on the type of remote controller.



Blue fin condenser
The anti-corrosion Blue Fin treatment of the heat exchanger provides greater resistance against corrosion. All models are equipped with Blue Fin condenser.


High durability outdoor unit
Corrosion-resistance treated for high resistance to rust and salty air to assure long-lasting performance.

Note: Selecting this unit does not completely eliminate the possibility of rust developing. For details
concerning unit installation and maintenance, please consult an authorised dealer.

* Specific model with suffix “E” has this treatment.



Quiet operation mode
• Quiet operation mode reduces outdoor unit operating sound down to 7dB than rating.
• 3-step set point is available.
• External input signal is also available.

* Timer setting of quiet operation mode is available in High-spec Remote Controller (CZ-RTC5B/CZ-RTC6 series).